Side-Power SE Series 30kg Thruster 12VDC
Complete Your Purchase
To provide reliable & safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern & other locations that may get wet or be exposed to petrol fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with petrol engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no petrol fumes can enter & be ignited by sparks. The other advantage is that the electric parts that could be damaged by water are also covered & protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry. The ultra-compact SE30 thruster offers the 60 to 85lb. of thrust in a package small enough to fit in boats as small as 20' load. A sealed gearleg, high performance prop & easy-access zincs make it a powerful & easy-to-maintain addition to any boat.
- Intelligent power control (IPC)
- Galvanic separation/insulation
- Ignition protected
- Q-prop™ propeller
- Single propellers
- Gravity feed lubrication
- Sealed drive/lifetime lubricated
- New flexible coupler
- Revised gearleg/end caps
- Design upgrades
- Power: 1.5kW at 10.5 Volts
- Internal Tunnel Diameter: 125mm
- Propulsion System: Single, 5-Blade
- Boat Size: 20 to 28'
- Battery Capacity: 380 CCA SAE
- (TL min.) Minimum Tunnel Length: 111mm / 4.37in
- (TL) Recommended Tunnel Length: 136mm / 5.35in
- (T min.) Minimum Tunnel Wall Thickness: 4mm / 0.16in
- (T max.) Maximum Tunnel Wall Thickness: 6mm / 0.24in
