Side-Power SE Series 210kg Thruster 24VDC
Complete Your Purchase
To provide reliable & safe thruster installations in more boats, we offer modified versions of our DC electric thrusters in watertight housings for use in stern & other locations that may get wet or be exposed to petrol fumes. These thrusters are fully ignition protected (ISO 8846) for use in boats with petrol engines. They have a hermetically sealed composite housing around all electric parts. This provides the ignition protection as no petrol fumes can enter & be ignited by sparks. The other advantage is that the electric parts that could be damaged by water are also covered & protected, making these thrusters the ideal choice for other stern thruster installations where it is difficult to ensure that the thruster will always remain dry. The 210/250TC is designed for yachts from 55 to 78' load. It's large, 13.15HP motor & robust gearing generate from 462 (at 21 Volts) to 550lb. (at 24 Volts) of thrust - all in only a 10" tunnel diameter. Like all other Sidepower units, it is loaded with safety features & has a wide range of accessories available to customize any installation to each owner's individual requirements.
- Certified to ISO 8846 ignition protected standards
- Water proof (not for submerged mounting)
- Tinned plated brass terminals
- Manufactured, tested & delivered as a ready sealed unit, ensuring that the installer does not have to fit any other parts that can jeopardize the hermetical seal
- Supplied with plug & go control cable
- Ignition protected housing can be opened & thereby retains serviceability of components inside the enclosure
- Power: 10kW
- Internal Tunnel Diameter: 250mm
- Propulsion System: Twin Counter Rotating, 5-Blade
- Boat Size: 55 to 78'
- Battery Capacity: 1330 CCA SAE
- Sealed Gearleg
- (TL min.) Minimum Tunnel Length: 273mm / 10.75in
- (TL) Recommended Tunnel Length: 323mm / 12.72in
- (T min.) Minimum Tunnel Wall Thickness: 7mm / 0.28in
- (T max.) Maximum Tunnel Wall Thickness: 9mm / 0.35in
