Battery Cable by the Foot

Use a battery cable that was designed specifically for the marine environment

At the core of every ANCOR battery cable are fine-stranded tinned copper conductors, the gold standard for marine wiring. Tinning each copper strand protects against oxidation and corrosion, even in harsh saltwater environments where untreated copper would degrade quickly and cause resistance to build up over time. The fine stranding also makes this a Type 3 super-flexible cable that bends easily around tight corners and through cramped bilge runs without kinking, cracking, or fatigue, even in cold temperatures down to -40°C (-40°F).

Protecting those copper conductors is ANCOR's exclusive vinyl insulation jacket, formulated to resist the toughest conditions found on any vessel. This insulation withstands saltwater spray, petroleum-based oils, battery acid, gasoline, UV radiation, heat, and physical abrasion. Rated for 105°C in dry applications and 75°C in wet applications, this cable meets the standards required for routing in engine rooms where heat and fumes are constant concerns. It fully complies with UL 1426, US Coast Guard Charter Boat requirements under CFR Title 46, and ABYC electrical standards, so you can wire with confidence, knowing your installation meets or exceeds every major safety benchmark.

One of the most practical advantages of purchasing ANCOR battery cable by the foot is the ability to cut exactly what your project requires, with lengths available up to 100 feet. No more buying pre-cut lengths that leave you short or force you to splice. Whether you need 6 feet or 60 feet, you get a clean, seamless cable run with zero waste and no compromise. Available in red, black, and yellow to support proper color coding of your electrical system, ANCOR battery cable makes it easy to do the job right the first time, so you can spend less time in the engine room and more time on the water.

Key Features

• Rated for 600V, 105°C dry and 75°C wet for safe routing through engine compartments
• Fine stranded tinned copper conductors for maximum conductivity and long-term corrosion resistance
• Exclusive vinyl insulation resists saltwater, oil, battery acid, gasoline, heat, abrasion, and UV radiation
• Type 3 super flexible construction stays pliable and easy to route even in cold environments down to -40°C
• Exceeds UL 1426, US Coast Guard Charter Boat (CFR Title 46), and ABYC electrical standards
• Sold by the foot in lengths up to 100 feet for precise, waste-free custom installations
• Available in red, black, and yellow for proper marine electrical color coding