Trilux 33 Antifouling Paint
Model #
P004_121_001_510
Mfg #
YBA061/QT
$149.99
-
$1,099.00
Orders placed by 3 PM EST typically ship the same day. Orders placed after this time will be processed the next business day.
Trilux 33 Antifouling Paint
Model #
P004_121_001_510
Mfg #
YBA061/QT
$149.99
-
$1,099.00
Color:
Select Color
Capacity:
Out Of Stock
Item out of stock get notified when back in stock:
Thank you!
We'll let you know when it's back in stock.
Quantity not available. Please adjust.
−
+
Complete Your Purchase
Safe for aluminum hulls, Trilux 33 provides multi-season antifouling protection.
Dual-biocide Trilux 33 uses cuprous thiocyanate to control hard fouling growth and Biolux technology to control slime and algae growth. Because it uses cuprous thiocyanate instead of cuprous oxide (commonly used in most bottom paints), Trilux 33 can be applied to aluminum hulls, outboards, and sterndrives without fear of galvanic corrosion.
As an ablative paint with a slow polishing action, Trilux 33 is a good choice for fast, active, frequently used boats. Because it slowly self-polishes and wears away at a controlled rate, paint build-up is reduced, along with the need for sanding at haulout.
Additionally, unlike antifouling paints that contain cuprous oxide, Trilux 33 retains its effectiveness when exposed to air, making it ideal for trailered boats. You can paint in the fall and splash in the spring! Trilux 33 is available in five bright colors: Blue, Green, Red, Black, and White.
Key features
- Formulated specifically for aluminum hulls, outdrives, and outboards
- Application for fiberglass, wood, and underwater metals
- Durable copolymer polishing system for fast active crafts
- Improved Biolux technology for control of algae and slime growth
Physical Data
- Vehicle type: Ablative
- Finish: Low sheen
- Available colors: Red, Blue, Black, Green, White
- Components: 1
- Curing mechanism: Solvent Release
- Solids by weight: (Theoretical): 45%
- Solids by volume: (Theoretical): 55 +/- 2%
- Coverage: 443.7 sq. ft. /gallon
- VOC: 390 grams/liter (Max) (as supplied and applied)
- Active ingredients: 24% Cuprous Thiocyanate
- Flash point: None
Application
- Application Method: Brush, roller, conventional spray, airless spray
- Number of coats recommended: 2-3 (Three on bare wood)
- Dry Film Thickness: 2 mils
- Wet Film Thickness: 3.9 mils wet
- Applicator: High-quality short nap roller (maximum 3/8” nap)
- Application temperature: Min. /Max. Range: 95° F. Min/41°F. Max
- Thinner: Special thinner 216, Model 117598 or 433, Model 203679
Drying times* (Hours)
| Drying | @41°F | @50°F | @73°F | @95°F |
|---|---|---|---|---|
| To touch | 8 hr. | 6 hr. | 3 hr. | 2 hr. |
| To recoat | 24 hr. | 20 hr. | 6 hr. | 4 hr. |
| To launch | 36 hr. | 30 hr. | 12 hr. | 10 hr. |
Get the right amount of paint:
| Boat Type | Bottom Paint |
|---|---|
| 10' Dinghy | 1 qt. |
| 14' Outboard | 1-2 qt. |
| 18' Runabout | 2 qt. |
| 20' Sailboat | 3 qt. |
| 24' Runabout | 3-4 qt. |
| 30' Sailboat | 1.5 gal. |
| 32' Cruiser | 1.5-2 gal. |
| 36' Auxiliary | 2 gal. |
| 40' Cruiser | 2.5 gal. |
| 45' Sailboat | 3-3.5 gal |
| 50' Sportfisher | 4+ gal. |
Another way to determine bottom paint quantity is to estimate the approximate surface area of the hull below the waterline, using the following formula:
Length x Beam x .75 = Approximate underwater surface area in square feet.
Each paint has a “theoretical coverage” area, but most paints require at least two coats, so you can expect actual coverage to be no greater than half of the theoretical value.
Aluminum Safe
Aluminum Safe
Anti-Slime Additive
Biolux
Biocide
Cuprous Thiocyanate
Coverage
443.7 Square Feet/Gallon
Cure Time
To Overcoat: 4-24 Hours; To Launch: 10-36 Hours
Type
Ablative
You May Also Like
Sale
Sale
Sale
INTERLUX
10
$75.74
-
$212.49
Price reduced from
$431.99
to
-
Price reduced from
$1,218.99
to
Sale
